Table of Contents
- Introducing the NF-M series
- Most laser projector manufacturers
- International Laser Display Association
- The NF Laser show system has multiple power levels
Introducing the NF-M series
A full-color RGB animation laser effect. The irresistible appeal of its 3D laser effect can only be compared with its external beauty. Dressed in matte black, it is ready to attract you and your audience for many years to come.
The NF-M series is a high-power 25Kpps 2W/3W RGB laser effect lamp, designed to please the dazzling display of 128 static patterns and 7 animated patterns. The rich saturated colors from independent red/green/blue laser modules and a high -speed scanner system of 25,000 points per second (25kpss) can generate incredible 3D effects, smooth shapes and fast-moving aerial effects. Set the lamp to automatic shape mode, automatic animation mode, sound activation mode or 6/25 channel DMX mode through its traditional sliding rear panel dial switch to fully control all special functions of the NF-M series and RGB laser color mixing capabilities.
In DMX mode, the NF-M series allows full control of mode choice, pattern choice, color change effects, as well as automatic and manual X/Y position adjustment, X/Y dimmer, rotation, zoom, drawing and scrolling functions.
The NF-M series is compact in size and light in weight, less than 4.5 pounds. It can be easily installed via a single safety suspension bracket.
Just add one or more NF-M series RGB animation laser effect devices to your lighting equipment, and you will bring an incredible laser show to those who have saw it.
Most laser projector manufacturers
NF-M series animation laser uses a high-speed optical scanner to create animation graphics, 256 beams of display and graphic display patterns, and has unique blanking, stereoscopic, rotating, moving, rolling, zooming (+/-), drawing and speed , etc. Function.
Most laser projector manufacturers use the term "KPPS" or thousands of points per second when defining optical scanning speed. Therefore, if you see specifications such as "20K, 30K, 40K, 60K, etc.", when you look at the speed of the laser, this is the speed your laser scanner can produce.Another reason that is as important as the speed of the optical scanning system is the specified angle. The best scanning angle for most laser projectors is 8°.
International Laser Display Association
This standard was formulated by the International Laser Display Association, which is responsible for overseeing most laser specifications now on the market. We use 8° because this is usually the smallest scan angle you need to use in a real world scene.Most laser projectors have one to three laser modules (red, green, and blue) inside. Although the international standard provides up to 6 color channels to control up to 6 different color laser modules.The color of the laser module is determined by its wavelength and the laser diode inside. It is measured in nanometers (Nm). All 6 international standard colors are listed below.
There are many different types of laser projection projectors and laser manufacturers on the market today. Trying to decide which brand, model, or type of laser projector you need can be stressful because the components of the laser directly affect the quality of the programs you can create.In this laser projector buying guide, we will give you a wealth of insights on laser projector specifications to help you understand what to look for when buying or comparing laser projectors.
The NF Laser show system has multiple power levels
the total output power of the laser projector may be one of the most important factors to consider when choosing the right laser system for your desired application.
It should be noted that the overall "wattage" is not the only determinant of the apparent brightness of the laser.Laser power is usually specified in "watts (W)" or "milliwatts (mw)".For example, 1W = 1,000mw.
Laser specifications can be deceptive, depending on how they are written, so you need to be careful and make sure that when you look at the marked power rating, you get the actual output power you need and are paying.
When looking at different laser projection systems, the manufacturer usually does not give you the output power of the laser in the output window. This is the measured value of the power you will receive after outputting from the laser, not the power inside the laser. If you plan to perform an audience scanning laser show, it is very important to understand this.
NF-M is designed to shoot stunning aerial effects, tunnels, fans, shapes and sheets, as well as simple custom graphics, logos, texts, etc., with maximum brightness covering your venue in a beautiful laser. More than 300 built-in shapes, patterns, layers, tunnels, fences, waves, graphics and animations. 70 degree scanning angle, 15Kpps optical scanner.